|
STRUCTURE:
The
heat meter consists of integrator,
temperature sensor and special flow meter.
In
addition to its high measuring accuracy,
the meter has up to 16 display items and can record various
operating parameters,
which provide important reference value for management of heating
system.
|
MAIN TECHNICAL PARAMETER:
1.
Applicable standards:
EN 1434-1997, CJ 128-2000

2.
Accuracy Class:
Class 3
3.
Main Technical Specification:
a.
Min. display unit for heat quantity:
0.01kW.h
b.
Accuracy of temperature sensor pair:0.1℃
c.
Accuracy of metering temperature:
<0.3℃
d.
Diameters:
DN15,
DN20
e.
Range of media temperature:
4℃~95℃
f.
Temperature difference:
3℃~40℃
g.
Power supply:
Built-in 3.6VDC lithium battery
|
MAIN DISPLAYING CONTENT
(By
pressing the button,
items will be displayed one by one) |
|
Total quantity of heat |
unit:
0.01kW.h |
|
Total flow-rate |
unit:
m3 |
|
Temperature of inlet water |
Three digits,
one decimal place,
maximum displaying figure:
99.9℃ |
|
Temperature of outlet water |
Three digits,
one decimal place,
maximum displaying figure:
99.9℃ |
|
Instantaneous flow rate |
Unit: m3/h |
|
Present date |
Year,
month,
day |
|
Present time |
Hour,
minute,
second |
|
Power-on time |
Year, month, day |
|
Total time of operation |
Unit: hour |
|
Highest historical inlet temperature |
3
digits,
one decimal place,maximum
displaying value:
99.9℃,
alternating display with the occurring date. |
|
Highest historical instantaneous flow rate |
Unit: m3/h,
alternative displaying with occurring date. |
|
Consuming quantity of heat in last heating season |
Unit: kW.h (heating season ended every March 20) |
Caution: Warning for low batteries
Precaution for installation:
1.
Control valves are required to be installed at meter’s inlet
and outlet, for easy maintenance.
2.
Filter is needed at inlet of meter to avoid influence of
foreign materials on metering accuracy.
3.
Heat piping must be flushed before meter installation.
Technical specifications and
parameters are subject to change without notice. |